No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
legacy-station disable

legacy-station disable

Function

The legacy-station disable command denies access of non-HT STAs.

The undo legacy-station disable command permits access of non-HT STAs.

By default, access of non-HT STAs is permitted.

Format

legacy-station [ only-dot11b ] disable

undo legacy-station disable

Parameters

Parameter Description Value
only-dot11b Denies access of non-HT STAs that support only 802.11b.

-

Views

SSID profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

Non-HT STAs support only 802.11a/b/g and provide a data transmission rate far smaller than the rate of 802.11n/ac STAs. If the non-HT STAs access the wireless network, the data transmission rate of 802.11n/ac STAs will be reduced. To prevent the transmission rate of 802.11n/ac STAs from being affected, you can run the legacy-station [ only-dot11b ] disable command to deny access of all or only 802.11b-compliant non-HT STAs.

Configuration Impact

After the legacy-station disable command is run, non-HT STAs supporting only 802.11a/b/g cannot access the wireless network.

After the legacy-station only-dot11b disable command is run, non-HT STAs supporting only 802.11b cannot access the wireless network.

After access of non-HT STAs is denied, services may be interrupted.

Precautions

After the legacy-station disable command is run, the access of non-HT STAs supporting only 802.11a/b/g fails to be denied if any of the following functions is configured on the non-HT STAs:
  • WMM function in a 2G or 5G radio profile enabled using the wmm disable command
  • Pre-shared key authentication and TKIP encryption for WPA/WPA2 configured using the security { wpa | wpa2 | wpa-wpa2 } psk { pass-phrase | hex } key-value tkip command
  • 802.1X authentication and TKIP encryption for WPA/WPA2 configured using the security { wpa | wpa2 | wpa-wpa2 } dot1x tkip command
  • WEP shared key authentication mode configured using the security wep [ share-key ] command
  • 802.11b/g radio type in the 2G radio profile configured using the radio-type { dot11b | dot11g } command
  • 802.11a radio type in the 5G radio profile configured using radio-type dot11a command

After the legacy-station only-dot11b disable command is run, the access of non-HT STAs supporting only 802.11b is denied. If 802.11b radio type in the 2G radio profile has been configured using the radio-type dot11b command, the access of non-HT STAs supporting only 802.11b fails to be denied.

Example

# Deny access of non-HT STAs.

<Huawei> system-view
[Huawei] wlan 
[Huawei-wlan-view] ssid-profile name ssid1
[Huawei-wlan-ssid-prof-ssid1] legacy-station disable
Warning:  If the wmm disable command, TKIP, WEP, or radio type of 802.11a/b/g is configured, the function of denying access of legac
y STAs cannot take effect.
Related Topics
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 195103

Downloads: 118

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next