No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
stream-reassemble enhanced-mode

stream-reassemble enhanced-mode


The stream-reassemble enhanced-mode command enables the enhanced traffic reassembly mode.

The undo stream-reassemble enhanced-mode command disables the enhanced traffic reassembly mode.


stream-reassemble enhanced-mode

undo stream-reassemble enhanced-mode




System view

Default Level

2: Configuration level

Usage Guidelines

By default, the enhanced traffic reassembly mode is disabled.

The command is used to enable the enhanced traffic reassembly mode in the bypass deployment scenario. After this mode is enabled, sequence number reassembly is supported when TCP data packets and three-way handshake packets are out of order.


# Enable the enhanced traffic reassembly mode.

<Huawei> system-view
[Huawei] stream-reassemble enhanced-mode
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 198544

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next