No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



The user command changes the current FTP user when the local device is connected to the FTP server.


user user-name [ password ]


Parameter Description Value
user-name Specifies the login password. The value is a string of 1 to 64 case-insensitive characters without space.
password Specifies the login password. The value is a string of 1 to 16 case-sensitive characters without space, single quotation mark, or question mark.


FTP client view

Default Level

3: Management level

Usage Guidelines

Usage Scenario

You can run the user command to change the current user on the FTP server.


After you run the user command to change the current user, a new FTP connection is set up, which is the same as that you specify in the ftp command.


# Log in to the FTP server using the user name tom.

<Huawei> ftp
Trying ...
Press CTRL+K to abort
Connected to
220 FTP service ready.
331 Password required for huawei.
Enter password:
230 User logged in. 
[Huawei-ftp] user tom
331 Password required for tom.
Enter password: 
230 User logged in.
Related Topics
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 199191

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next