No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
lldp enable (system view)

lldp enable (system view)

Function

The lldp enable command enables LLDP globally.

The undo lldp enable command disables LLDP globally.

By default, LLDP is enabled globally.

Format

lldp enable

undo lldp enable

Parameters

None

Views

System view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

To view the Layer 2 link status or analyze network topology, run the lldp enable command.

Configuration Impact

After LLDP is enabled globally, the device sends its own status information to LLDP-enabled neighbors and receives the status information from the neighbors.

Precautions

LLDP can be enabled in the system view and the interface view.
  • After LLDP is enabled in the system view, all interfaces are enabled with LLDP.
  • After LLDP is disabled in the system view, all LLDP settings are restored to the default settings except the setting of LLDP trap. Therefore, LLDP is also disabled on all interfaces.
  • An interface can send and receive LLDP packets only after LLDP is enabled in both the system view and the interface view.
  • After LLDP is disabled globally, the commands for enabling and disabling LLDP on an interface do not take effect.

Example

# Enable LLDP globally.

<Huawei> system-view
[Huawei] lldp enable
Info: Global LLDP is enabled successfully.

# Disable LLDP globally.

<Huawei> system-view
[Huawei] undo lldp enable
Warning: This command will delete the configurations of LLDP on all the ports.Continue?[Y/N]y
Info: Global LLDP is disabled successfully.
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 206870

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next