No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
authentication termination-action reauthenticate

authentication termination-action reauthenticate

Function

The authentication termination-action reauthenticate command configures the device to re-authenticate users when the time exceeds the value of Session-Timeout delivered by the RADIUS server.

The undo authentication termination-action command restores the default setting.

By default, the device is not configured to re-authenticate users when the time exceeds the value of Session-Timeout delivered by the RADIUS server.

Format

authentication termination-action reauthenticate

undo authentication termination-action

Parameters

None

Views

Authentication profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

The RADIUS server uses the Session-Timeout attribute to control the remaining online time of a user, and uses the Termination-Action attribute to determine whether to re-authenticate the user when the timeout interval expires. By default, if the RADIUS server delivers Session-Timeout but no Termination-Action, the device disconnects users when the time exceeds the value of Session-Timeout. To re-authenticate users without modifying the server configuration, you can run this command to configure the device to re-authenticate users when the timeout interval expires.

Precautions

Only 802.1X authentication and MAC address authentication on Layer 2 interfaces support this function.

Example

# In authentication profile authen1, configure the device to re-authenticate users when the time exceeds the value of Session-Timeout delivered by the RADIUS server.

<Huawei> system-view
[Huawei] authentication-profile name authen1
[Huawei-authentication-profile-authen1] authentication termination-action reauthenticate
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 202425

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next