No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
peer-ap mac (Mesh whitelist profile view)

peer-ap mac (Mesh whitelist profile view)

Function

The peer-ap mac command adds MAC addresses of neighboring APs that are allowed to connect to an AP to a Mesh whitelist profile.

The undo peer-ap mac command deletes the MAC addresses of neighboring APs from a Mesh whitelist profile.

By default, no MAC address of a neighboring AP is added to a Mesh whitelist profile.

Format

peer-ap mac mac-address

undo peer-ap mac mac-address

Parameters

Parameter

Description

Value

mac-address

Specifies the MAC address of a neighboring AP to be added to a Mesh whitelist profile.

The value is in H-H-H format. An H is a hexadecimal number of 4 digits.

Views

Mesh whitelist profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

After a Mesh whitelist profile is created, you can run the peer-ap mac command to add neighboring APs' MAC addresses to the profile.

If a Mesh whitelist profile is bound to a Mesh profile, only APs with MAC addresses in the Mesh whitelist profile can access the local AP, and other APs are denied access.

In vehicle-ground fast handover application scenarios, you need to configure Mesh whitelists for trackside APs and vehicle-mounted APs, which can prevent a vehicle-mounted AP from connecting to trackside APs along a different track or a trackside AP from connecting to the vehicle-mounted AP along a different track.

Precautions

A maximum of 512 MAC addresses can be added to a Mesh whitelist.

Example

# Create the Mesh whitelist profile whitelist and add the MAC address 0001-0001-0001 to the whitelist profile. Bind the Mesh whitelist profile whitelist to radio 0.

<Huawei> system-view
[Huawei] wlan
[Huawei-wlan-view] mesh-whitelist-profile name whitelist
[Huawei-wlan-mesh-whitelist-whitelist] peer-ap mac 0001-0001-0001
[Huawei-wlan-mesh-whitelist-whitelist] quit
[Huawei-wlan-view] quit
[Huawei] interface Wlan-Radio 0/0/0
[Huawei-Wlan-Radio0/0/0] mesh-whitelist-profile whitelist
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 207362

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next