No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
igmp-snooping group-bandwidth (system view)

igmp-snooping group-bandwidth (system view)

Function

The igmp-snooping group-bandwidth command configures the bandwidth of global multicast groups.

The undo igmp-snooping group-bandwidth command deletes the bandwidth of global multicast groups.

By default, the bandwidth of global multicast groups is not configured.

Format

igmp-snooping group-bandwidth start-group-address start-group-address end-group-address end-group-address bandwidth bandwidth-value

undo igmp-snooping group-bandwidth start-group-address start-group-address end-group-address end-group-address

Parameters

Parameter Description Value

start-group-address start-group-address

Specifies the start multicast group address.

The value is in dotted decimal notation.

end-group-address end-group-address

Specifies the end multicast group address.

The value is in dotted decimal notation.

bandwidth bandwidth-value

Specifies the bandwidth of multicast groups.

The value is an integer that ranges from 1 to 100000, in kbps.

Views

System view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

You can configure the bandwidth of multicast groups in a system view according to the actual bandwidth of a multicast program. This configuration takes effect globally and for a specified VAP. When users request to order this multicast program, the AP collects statistics on the current multicast bandwidth according to the bandwidth configured globally or for a VAP and the number of multicast group memberships, and compares the current bandwidth with the configured maximum bandwidth to determine whether to allow users to order this multicast program.

Precautions

You can configure the bandwidth for a maximum of 32 multicast group address segments. Addresses in one address segment must be different from those in another address segment. The configured address segments must contain valid multicast program addresses.

Example

# Set the bandwidth to 100 kbps for multicast group address segment from 224.0.1.0 to 224.255.255.255.

<Huawei> system-view
[Huawei] igmp-snooping group-bandwidth start-group-address 224.0.1.0 end-group-address 224.255.255.255 bandwidth-value 100
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 204413

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next