No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
sta-load-balance dynamic channel-utilization start-threshold

sta-load-balance dynamic channel-utilization start-threshold

Function

The sta-load-balance dynamic channel-utilization start-threshold command sets the start threshold for dynamic load balancing based on the channel usage.

The undo sta-load-balance dynamic channel-utilization start-threshold command restores the default start threshold for dynamic load balancing based on the channel usage.

By default, the start threshold for dynamic load balancing based on the channel usage is 50%.

Format

sta-load-balance dynamic channel-utilization start-threshold start-threshold

undo sta-load-balance dynamic channel-utilization start-threshold

Parameters

Parameter

Description

Value

start-threshold start-threshold

Specifies the start threshold for dynamic load balancing based on the channel usage.

The value is an integer that ranges from 1 to 99, in percentage.

Views

RRM profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

After the start threshold is configured for dynamic load balancing based on the channel usage, an AP calculates the channel usage of the radio with which a STA associates when the STA requests to connect to the AP. If the channel usage does not exceed the start threshold, the STA access is permitted. If the channel usage exceeds the start threshold, the AP calculates the load difference for dynamic load balancing based on the channel usage. You can run the sta-load-balance dynamic channel-utilization gap-threshold command to configure the load difference threshold for dynamic load balancing based on the channel usage.

Example

# Set the start threshold for dynamic load balancing based on the channel usage to 60%.

<Huawei> system-view
[Huawei] wlan
[Huawei-wlan-view] rrm-profile name default
[Huawei-wlan-rrm-prof-default] sta-load-balance dynamic channel-utilization start-threshold 60
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 211564

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next