No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
radius-server detect-server timeout

radius-server detect-server timeout

Function

The radius-server detect-server timeout command configures the timeout period for RADIUS detection packets.

The undo radius-server detect-server timeout command restores the default settings.

By default, the timeout period for RADIUS detection packets is 3 seconds.

Format

radius-server detect-server timeout timeout

undo radius-server detect-server timeout

Parameters

Parameter

Description

Value

timeout

Specifies the timeout period for RADIUS detection packets.

The value is an integer that ranges from 1 to 10, in seconds.

Views

RADIUS server template view

Default Level

3: Management level

Usage Guidelines

Usage Scenario

After the automatic detection function is enabled using the radius-server testuser command, you can run the radius-server detect-server timeout command to adjust the timeout period for RADIUS detection packets based on the actual response rate of the RADIUS server.

Precautions

You are advised to set a timeout period for RADIUS detection packets smaller than the automatic detection interval to prevent the device from sending a detection packet again before completing processing the response packet from the RADIUS server. If the actual timeout period for RADIUS detection packets is larger than the automatic detection interval, the smaller value is the timeout period, namely:
  • For the RADIUS server in Down status, the smaller one between values configured using the radius-server detect-server timeout and radius-server detect-server interval commands is the timeout period for detection packets.
  • For the RADIUS server in Up status, the smaller one between values configured using the radius-server detect-server timeout and radius-server detect-server up-server interval command is the timeout period for detection packets.

Example

# Set the timeout period for RADIUS detection packets to 5 seconds in the RADIUS server template acs.

<Huawei> system-view
[Huawei] radius-server template acs
[Huawei-radius-acs] radius-server detect-server timeout 5
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 194799

Downloads: 118

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next