suppression event-name
Function
The suppression event-name command configures the period of delay in reporting events.
The undo suppression event-name command restores the period of delay in reporting events.
The system has defined a default period of delay in reporting events.
Format
suppression event-name event-name period seconds
undo suppression event-name event-name period
Parameters
| Parameter | Description | Value |
|---|---|---|
| event-name | Specifies the name of the event for which the period of delay in reporting events is to be configured. | The value is of enumeration type and varies according to the registered device type. NOTE:
To view registered alarm information, run the display event information command. |
| period seconds | Specifies the period of delay in reporting events. | The value is an integer ranging from 0 to 600, in seconds. When the value is 0, the event is reported to the NMS without delay. |
Usage Guidelines
Usage Scenario
When an event is reported repeatedly, users can use the event reporting delay function to prevent the event from being reported to the NMS. The suppression event-name command configures the period of delay in reporting events.
After the event reporting delay function is enabled and the period of delay is configured, the system discards the event that is generated several times during the delay. When the delay expires, the system reports only the first event.
Prerequisites
The event reporting delay function has been enabled using the delay-suppression enable command.
Precautions
Each event can be configured with a period of reporting different delay. Run the undo suppression event-name and display event information commands in sequence to view the default period of reporting delay.
During event reporting, if you change the period of delay in reporting events, the new delay takes effect on the next alarm.
Previous
