No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
portal-access-profile (authentication profile view)

portal-access-profile (authentication profile view)


The portal-access-profile command binds a Portal access profile to an authentication profile.

The undo portal-access-profile command unbinds a Portal access profile from an authentication profile.

By default, an authentication profile is not bound to a Portal access profile.


portal-access-profile access-profile-name

undo portal-access-profile






Specifies the name of a Portal access profile.

The value must be the name of an existing Portal access profile.


Authentication profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

The authentication type used by an authentication profile is determined by the access profile bound to the authentication profile. After being bound to a Portal access profile, the authentication profile is enabled with Portal authentication. After the authentication profile is applied to the VAP profile, Portal authentication can be performed on online users.


The Portal server has been configured for the Portal access profile:
  • If the external Portal server is used, the Portal server profile used by the Portal access profile has been configured using the web-auth-server (Portal access profile view) command.
  • If the built-in Portal server is used, the built-in Portal server function of the Portal access profile has been enabled using the portal local-server enable command.

Follow-up Procedure

Run the authentication-profile (VAP profile view) command to apply the authentication profile to the VAP profile.


An authentication profile can be bound to only one Portal access profile.


# Bind the authentication profile portal_authen_profile1 to the Portal access profile portal_access_profile1. The IP address of the Portal server is, and Layer 2 Portal authentication is used.

<Huawei> system-view
[Huawei] web-auth-server server1
[Huawei-web-auth-server-server1] server-ip
[Huawei-web-auth-server-server1] quit
[Huawei] portal-access-profile name portal_access_profile1
[Huawei-portal-access-profile-portal_access_profile1] web-auth-server server1 direct
[Huawei-portal-access-profile-portal_access_profile1] quit
[Huawei] authentication-profile name portal_authen_profile1
[Huawei-authentication-profile-portal_authen_profile1] portal-access-profile portal_access_profile1
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 196695

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next