No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display ftp-client

display ftp-client


The display ftp-client command displays the source IP address configured for the FTP client.


display ftp-client




All views

Default Level

3: Management level

Usage Guidelines

The default source IP address is if ftp client-source is not configured.


# Display the source IP address of the FTP client.

<Huawei> display ftp-client
Info: The source IP address of FTP client is
Table 2-30  Description of the display ftp-client command output



Info: The source IP address of FTP client is is the source IP address of the FTP client.

You can run the ftp client-source command to configure the source IP address.

If the IP address is configured for the source port, the message "The source interface of FTP client is LoopBack0" is displayed.

Related Topics
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 207793

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next