No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
wids-profile (WLAN view)

wids-profile (WLAN view)


The wids-profile command creates a WIDS profile and displays the WIDS profile view.

The undo wids-profile command deletes a WIDS profile.

By default, the system provides the WIDS profile default.

You can run the display wids-profile command to view configuration of the WIDS profile default.


wids-profile name profile-name

undo wids-profile { name profile-name | all }





name profile-name

Specifies the name of a WIDS profile.

The value is a string of 1 to 35 case-insensitive characters. It does not contain question marks (?) or spaces, and cannot begin or end with double quotation marks (" ").

all Deletes all WIDS profiles.

The default WIDS profile default can be modified but cannot be deleted.


WLAN view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

You can configure the WIDS function on a device to detect and counter rogue devices on a WLAN. The WIDS function also enables the device to detect attacks and add devices launching the attacks to a dynamic blacklist. Packets sent from the blacklisted devices will be rejected to protect authorized users.

After you create a WIDS profile using the wids-profile command, you can configure APs to detect and counter rogue or interference devices, and detect attacks in the profile.

Follow-up Procedure

Run the wids-profile (AP group view and AP view) command to bind the WIDS profile to an AP group or AP so that the WIDS profile can take effect.


# Create the WIDS profile office.

<Huawei> system-view
[Huawei] wlan 
[Huawei-wlan-view] wids-profile name office
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 208189

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next