No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ftp acl

ftp acl


The ftp acl command specifies an ACL number for the current FTP server so that the FTP client with the same ACL number can access the FTP server.

The undo ftp acl command deletes an ACL number of the current FTP server.

By default, no ACL is configured for FTP server.


ftp acl acl-number

undo ftp acl


Parameter Description Value
acl-number Specifies the number of the ACL. The value is an integer that ranges from 2000 to 2999.


System view

Default Level

3: Management level

Usage Guidelines

Usage Scenario

To ensure the security of an FTP server, you need to configure an ACL for it to specify FTP clients that can access the current FTP server.


  • The ftp acl command takes effect only after you run the rule command to configure the ACL rule.
  • The FTP only supports the basic ACL whose number ranges from 2000 to 2999.


# Allow the client whose ACL number is 2000 to log in to the FTP server.

<Huawei> system-view
[Huawei] acl 2000
[Huawei-acl-basic-2000] rule permit source 0
[Huawei-acl-basic-2000] quit
[Huawei] ftp acl 2000
Related Topics
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 207135

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next