No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
wmm disable

wmm disable


The wmm disable command disables the Wi-Fi Multimedia (WMM) function in a 2G or 5G radio profile.

The undo wmm disable command enables the WMM function in a 2G or 5G radio profile.

By default, the WMM function is enabled in a 2G or 5G radio profile.


wmm disable

undo wmm disable




2G radio profile view, 5G radio profile view

Default Level

2: Configuration level

Usage Guidelines

802.11ax, 802.11ac and 802.11n STAs must support WMM. If the WMM function is disabled in a radio, 802.11ax, 802.11ac and 802.11n cannot work and STAs can access the network only in 802.11a/b/g mode.

If the WMM function is disabled, the access of non-HT STAs fails to be denied.

After the WMM function is enabled in a 2G or 5G radio profile, the AP radio to which the 2G or 5G radio profile is applied can use the WMM parameters.


# Enable the WMM function in 5G radio profile default.

<Huawei> system-view
[Huawei] wlan
[Huawei-wlan-view] radio-5g-profile name default
[Huawei-wlan-radio-5g-prof-default] undo wmm disable
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 211563

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next