No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
protocol (user-defined IPS signature view)

protocol (user-defined IPS signature view)


The protocol command configures the protocol in a user-defined signature.

The undo protocol command deletes the protocol from a user-defined signature.


protocol protocol-name

undo protocol


Parameter Description Value
protocol-name Specifies the name of a protocol in the user-defined signature. -


User-defined IPS signature view

Default Level

2: Configuration level

Usage Guidelines

A user-defined signature contains only one protocol.

The protocol of a predefined signature describes the type of the protocol used by an attack packet.


# Configure a user-defined signature. Set the ID to 1, name to mysignature, and protocol to UDP.

<Huawei> system-view
[Huawei] ips signature-id 1
[Huawei-ips-signature-1] name mysignature
[Huawei-ips-signature-1] protocol UDP
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 204112

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next