No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
reset logbuffer

reset logbuffer


The reset logbuffer command clears logs in the log buffer.


reset logbuffer




User view

Default Level

3: Management level

Usage Guidelines

Usage Scenario

To record logs in the log buffer again, run the reset logbuffer command to clear all the information in the log buffer.


Statistics cannot be restored after being cleared. Exercise caution when you run the reset logbuffer command.


# Clear information in the log buffer.

<Huawei> reset logbuffer
Warning: This command will reset the log buffer. Logs in the buffer will be lost
. Continue? (y/n)[n]:y
Related Topics
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 205340

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next