No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
source-ip (Portal server profile view)

source-ip (Portal server profile view)

Function

The source-ip command configures the source IP address for the device to communicate with a Portal server.

The undo source-ip command restores the default setting.

By default, no source IP address is configured for the device to communicate with a Portal server.

Format

source-ip ip-address

undo source-ip

Parameters

Parameter Description Value
ip-address Specifies the source IP address for communication with a Portal server. The value is in dotted decimal notation.

Views

Portal server profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

To ensure normal communication between the device and Portal server, run the source-ip command to configure a source IP address on the device.

If the device is configured with a loopback IP address and a common IP address, the device can communicate with the Portal server only when the loopback IP address and common IP address are the same. The source-ip command configures a source IP address on the device in the Portal server profile view to allow communication between the device and a Portal server.

Precautions

Ensure that the configured source IP address is the device IP address. The source IP address cannot be all 0s, all 1s, class D address, class E address, or loopback address.

Example

# Set the source IP address for communication between the device and a Portal server to 192.168.1.100 in the Portal server profile huawei.

<Huawei> system-view
[Huawei] web-auth-server huawei 
[Huawei-web-auth-server-huawei] source-ip 192.168.1.100
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 206179

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next