No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
admin-vrrp vrid

admin-vrrp vrid


The admin-vrrp vrid command specifies an mVRRP group.

The undo admin-vrrp vrid command deletes the specified mVRRP group.

By default, no mVRRP group is specified.


admin-vrrp vrid virtual-router-id

undo admin-vrrp vrid virtual-router-id





vrid virtual-router-id

Specifies the ID of an mVRRP group.

The value is a decimal integer that ranges from 1 to 255.


VLANIF interface view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

VRRP groups, VRRP-disabled interfaces, or PWs can be bound to an mVRRP group. After the bindings, the mVRRP group determines the master and backup VRRP status of the bound objects. mVRRP is used when multiple VRRP groups coexist, decreasing VRRP Advertisement packets to be sent and minimizing network bandwidth consumption. mVRRP is also used to determine the active and standby status of links along which a user device is dual-homed to a network.

mVRRP provides the following functions:

  • An mVRRP group used as the gateway can process both VRRP packets and service packets.

  • An mVRRP group that is not used as the gateway can only process VRRP packets.


An mVRRP group cannot be bound to another mVRRP group.


# Create VRRP group 1 and configure it as the mVRRP group.

<Huawei> system-view
[Huawei] interface vlanif 10
[Huawei-Vlanif10] ip address 24
[Huawei-Vlanif10] vrrp vrid 1 virtual-ip
[Huawei-Vlanif10] admin-vrrp vrid 1
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 212546

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next