No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
vrrp version

vrrp version


The vrrp version command configures a VRRP version number.

The undo vrrp version command restores the default VRRP version number.

By default, VRRPv2 is used.


vrrp version { v2 | v3 }

undo vrrp version


Parameter Description Value

Indicates that VRRPv2 is used.


Indicates that VRRPv3 is used.



System view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

If VRRPv2 and VRRPv3 are used on a network, and devices running VRRPv2 need to communicate with devices running VRRPv3, the vrrp version command can be used to specify a VRRP version number.


A VRRPv2 group can only send and receive VRRPv2 Advertisement packets. It discards the received VRRPv3 Advertisement packets.

A VRRPv3 group can send and receive both VRRPv2 and VRRPv3 Advertisement packets. You can configure the mode in which VRRPv3 Advertisement packets are sent so that devices running VRRPv2 need to communicate with devices running VRRPv3.

Follow-up Procedure

After VRRPv3 is used, run the vrrp version-3 send-packet-mode command in the system view or the vrrp vrid version-3 send-packet-mode command in the interface view to configure a mode in which VRRP Advertisement packets are sent.


# Set the VRRP version of the device to VRRPv3.

<Huawei> system-view
[Huawei] vrrp version v3
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 211503

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next