No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
dhcp client gateway-detect

dhcp client gateway-detect

Function

The dhcp client gateway-detect command enables gateway detection on a DHCP client.

The undo dhcp client gateway-detect command disables gateway detection on a DHCP client.

By default, gateway detection is disabled on a DHCP client.

Format

dhcp client gateway-detect period period retransmit retransmit timeout time

undo dhcp client gateway-detect

Parameters

Parameter

Description

Value

period period

Specifies an interval for gateway detection on a DHCP client.

The value is an integer that ranges from 1 to 86400, in seconds.

retransmit retransmit

Specifies the retransmission count of gateway detection on a DHCP client.

The value is an integer that ranges from 1 to 10.

timeout time

Specifies the timeout period of gateway detection on a DHCP client.

It is an integer that ranges from 300 to 2000, in milliseconds.

Views

VLANIF interface view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

The dhcp client gateway-detect command applies to DHCP clients. After a DHCP client obtains an IP address, the dhcp client gateway-detect command enables the DHCP client to detect the status of the gateway being used. If the gateway has an incorrect address or the gateway device fails, the DHCP client requests a new IP address from the DHCP server.

Example

# Enable gateway detection on VLANIF100 of the DHCP client. Set the detection interval to 3600s, retransmission count to 3, and timeout period to 500ms.

<Huawei> system-view
[Huawei] interface vlanif 100
[Huawei-Vlanif100] dhcp client gateway-detect period 3600 retransmit 3 timeout 500
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 210201

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next