No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display info-center

display info-center

Function

The display info-center command displays the output configuration of the information center.

Format

display info-center

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

None

Example

# Display output configuration of the information center.

<Huawei> display info-center
Information Center: enabled
Log host:                                                                       
        10.1.1.1, channel number: 2, channel name: loghost                      
        language: english, host facility: local7   
Console:
        channel number: 0, channel name: console
Monitor:
        channel number: 1, channel name: monitor
SNMP Agent:
        channel number: 5, channel name: snmpagent
Log buffer:
        enabled
        max buffer size: 1024, current buffer size: 512
        current messages: 6, channel number: 4, channel name: logbuffer
        dropped messages: 0, overwritten messages: 0
Trap buffer:
        enabled
        max buffer size: 1024, current buffer size: 256
        current messages: 0, channel number: 3, channel name: trapbuffer
        dropped messages: 0, overwritten messages: 0
Logfile:
        channel number: 9, channel name: channel9, language: English
Information timestamp setting:
        log - date, trap - date, debug - date

 Sent messages = 25, Received messages = 25
Table 4-24  Description of the display info-center command output

Item

Description

Information Center

Information center status:
  • enabled
  • disabled

To enable the information center, run the info-center enable command.

Log host

Log host configuration.

10.1.1.1

Log host IP address.

To set the log host IP address, run the info-center loghost command.

channel number

Number of a channel used to output information.

To set the number of a channel used to output information, run the info-center channel command.

channel name

Name of a channel used to output information.

To set the name of a channel used to output information, run the info-center channel name command.

language

Language mode in which information is output to a log host.

host facility

Logging tool.

To configure the logging tool, run the info-center loghost command.

Console

Console configuration.

Monitor

Remote terminal configuration.

SNMP Agent

SNMP agent configuration.

Log buffer

Log buffer configuration.

enabled

Whether the AP is enabled to send logs/traps to the log/trap buffer.

  • enabled
  • disabled

To enable the AP to send logs/traps to the log/trap buffer, run the info-center logbuffer or info-center trapbuffer command.

max buffer size

Maximum number of logs/traps in the log/trap buffer.

current buffer size

Maximum number of logs/traps in the current log/trap buffer.

To set the maximum number of logs/traps in the current log/trap buffer, run the info-center logbuffer size or info-center trapbuffer size command.

current messages

Number of messages recorded in the log/trap buffer.

dropped messages

Number of messages discarded by the log/trap buffer.

overwritten messages

Number of overwritten messages in the log/trap buffer.

Trap buffer

Trap buffer configuration.

logfile

Log file configuration.

Information timestamp setting

Timestamp format of logs, traps, and debugging messages:
  • boot: indicates that the timestamp is expressed in the format of relative time, a period of time since system start.
  • date: indicates the current system date and time. It is expressed in mm dd yyyy hh:mm:ss format.
  • short-date: indicates the short date. This timestamp differs from date is that the year is not displayed.
  • format-date: indicates that the timestamp is expressed in YYYY-MM-DD hh:mm:ss format.
  • none: indicates that the output information does not contain the timestamp.

To configure the timestamp format, run the info-center timestamp command.

Sent messages

Number of sent messages output by information center modules.

Received messages

Number of messages sent to information center modules.

Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 208389

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next