No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
detect max-time

detect max-time


The detect max-time command sets the maximum duration in which the SA module detects sessions.

The undo detect max-time command restores the maximum duration to the default value.


detect max-time max-time

undo detect max-time


Parameter Description Value
max-time Specifies the maximum session detection duration. The value is an integer ranging from 0 to 60, in minutes. The default value is 1.


SA view

Default Level

2: Configuration level

Usage Guidelines



# Set the maximum duration in which the SA module detects sessions to 5 minutes.

<Huawei> system-view
[Huawei] sa
[Huawei-sa] detect max-time 5
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 204055

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next