No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
lldp report enable

lldp report enable


The lldp report enable command enables an AP to report information about its LLDP neighbors.

The undo lldp report enable command disables an AP from reporting information about its LLDP neighbors.

By default, an AP does not report information about its LLDP neighbors.


lldp report enable

undo lldp report enable




AP system profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

You can run the lldp report enable command to enable an AP to report information about its LLDP neighbors.


# Enable an AP to report information about its LLDP neighbors.

<Huawei> system-view
[Huawei] wlan 
[Huawei-wlan-view] ap-system-profile name huawei
[Huawei-wlan-ap-system-prof-huawei] lldp report enable
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 196715

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next