No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
assoc-check enable

assoc-check enable


The assoc-check enable command enables the correlation detection function.

The undo assoc-check enable command disables the correlation detection function.


assoc-check enable

undo assoc-check enable




Intrusion prevention profile view

Default Level

2: Configuration level

Usage Guidelines

By default, the function is enabled.

Intrusion prevention detects traffic by signatures that can be either basic signatures or correlation signatures. A basic signature describes a simple network attack. A correlation signature is composed of one or more basic signatures and describes a complex network attack. Correlation detection is implemented on the basis of correlation signatures.

If traffic matches a correlation signature, the system displays only the matched correlation signature, but not the matched basic signature of the correlation signature. After the correlation detection function is disabled, when traffic matches a basic signature included in a correlation signature, the system displays the basic signature.

Disabling correlation detection decreases the security detection capability of the system and therefore is not recommended. In addition, it is easy for traffic to match a basic signature included in a correlation signature. Therefore, correlation detection deteriorates the device performance.


# Enable correlation detection in intrusion prevention profile profile1.

<Huawei> system-view
[Huawei] profile type ips name profile1
[Huawei-profile-ips-profile1] assoc-check enable
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 205623

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next