No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
dhcp client hostname

dhcp client hostname


The dhcp client hostname command configures a host name for a DHCP client.

The undo dhcp client hostname command deletes the configured host name of a DHCP client.

By default, no host name is configured for a DHCP client.


dhcp client hostname hostname

undo dhcp client hostname






Specifies the name of a DHCP client.

The value is a string of 1 to 64 case-sensitive characters.


VLANIF interface view

Default Level

2: Configuration level

Usage Guidelines

A DHCP server must obtain the host name of a client before assigning an IP address to the client. To configure a host name for a DHCP client, run the dhcp client hostname command. The host name is used to match the local domain name of the DHCP client.


# Set the host name of a DHCP client to huawei gateway on VLANIF100.

<Huawei> system-view
[Huawei] interface vlanif 100
[Huawei-Vlanif100] dhcp client hostname huawei gateway
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 207366

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next