No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
nat address-group

nat address-group

Function

The nat address-group command configures a NAT address pool.

The undo nat address-group command deletes a NAT address pool.

By default, no NAT address pool is configured.

Format

nat address-group group-index start-address end-address

undo nat address-group group-index

Parameters

Parameter

Description

Value

group-index

Specifies the index of a NAT address pool.

The value is an integer that ranges from 0 to 3.

start-address

Specifies the start address of the address pool.

The value is in dotted decimal notation.

end-address

Specifies the end address of the address pool.

The value is in dotted decimal notation.

Views

System view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

The address pool is a set of consecutive IP addresses. When a packet from the private network reaches the public network through address translation, the source address of the packet will be translated to another address by the address pool.

Precautions

The start IP address of the address pool must be smaller than or equal to the end IP address of the address pool and up to 255 IP addresses can be configured in the address pool.

Example

# Configure an address pool ranging from 10.110.10.10 to 10.110.10.15, with the address pool index being 1.

<Huawei> system-view
[Huawei] nat address-group 1 10.110.10.10 10.110.10.15  
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 212769

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next