No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
log module

log module


The log module command enables the device to report logs of the module with a specified ID to a WMI server.

The undo log module command disables the device from reporting logs of the module with a specified ID to a WMI server.

By default, the device does not report logs of any module to a WMI server.


log module mid mid

undo log module mid mid





mid mid

Specifies a module ID.

The value ranges from 0 to FFFF0000 in hexadecimal decimal notation.


WMI view

Default Level

2: Configuration level

Usage Guidelines

If the device needs to report logs to a WMI server, specify the ID of a module whose logs are to be reported and enable the log report function. Otherwise, the device does not report logs of this module.

To enable the device to report logs of multiple modules, run this command repeatedly to specify multiple module IDs.


# Enable the device to report logs of the module C1480000 to a WMI server.

<Huawei> system-view
[Huawei] wmi-server
[Huawei-wmi-server] log module mid c1480000
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 207492

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next