No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
dot1x quiet-period

dot1x quiet-period


The dot1x quiet-period command enables the quiet function for 802.1X authentication users.

The undo dot1x quiet-period command disables the quiet function for 802.1X authentication users.

By default, the quiet function is enabled for 802.1X authentication users.


dot1x quiet-period

undo dot1x quiet-period




System view

Default Level

2: Configuration level

Usage Guidelines

After the quiet timer function is enabled, if the number of authentication failures of an 802.1X user exceeds a specified value (set using the dot1x quiet-times command) within 60 seconds, the user enters a quiet period. During the quiet period, the device discards the 802.1X authentication request packets from the user. This prevents the impact on the system due to frequent user authentication.

The value of the quiet timer is set using the dot1x timer quiet-period command. When the quiet timer expires, the device re-authenticates the user.


# Enable the quiet timer.

<Huawei> system-view
[Huawei] dot1x quiet-period
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 204708

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next