No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display rrm-profile

display rrm-profile

Function

The display rrm-profile command displays information about an RRM profile.

Format

display rrm-profile { all | name profile-name }

Parameters

Parameter Description Value
all

Displays information about all RRM profiles.

-

name profile-name

Displays information about a specified RRM profile.

The RRM profile name must exist.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

You can run this command to view information about an RRM profile.

Example

# Display information about all RRM profiles.

<Huawei> display rrm-profile all
------------------------------------------------------------
Profile name  Reference
------------------------------------------------------------
default       2
------------------------------------------------------------
Total:1
Table 10-7  Description of the display rrm-profile all command output
Item Description

Profile name

Name of an RRM profile.

Reference

Number of times an RRM profile is referenced.

# Display information about the RRM profile default.

<Huawei> display rrm-profile name default
--------------------------------------------------------------------------
PER threshold for trigger channel/power select(%)            : 60
Noise-floor threshold for trigger channel/power select(dBm)  : -60
Calibrate tpc threshold(dBm):                                : -60
Calibrate maximum TX power(dBm):                             : 127
Calibrate minimum TX power(dBm):                             : 1 
Calibrate error rate check interval(min)                     : 1
Calibrate error rate check traffic threshold(kbps)           : 1250
Airtime fairness schedule                                    : disable
Dynamic adjust EDCA parameter                                : enable
Dynamic EDCA be-service threshold                            : 6 
UAC check client's SNR                                       : disable
UAC client's SNR threshold(dB)                               : 20
UAC hide SSID                                                : SSID broadcast          
Band steer deny threshold                                    : 5
Band steer SNR threshold(dB)                                 : 20
Band balance start threshold                                 : 10
Band balance gap threshold(%)                                : 20
Client's band expire based on continuous probe counts        : 35
Smart-roam                                                   : disable
Smart-roam check SNR                                         : enable
Smart-roam standing SNR threshold(dB)                        : 20
Smart-roam SNR quick-kickoff-threshold(dB)                   : 15 
Smart-roam rate threshold(%)                                 : 20
Smart-roam rate quick-kickoff-threshold(%)                   : 20 
Smart-roam high level SNR margin(dB)                         : 15
Smart-roam low level SNR margin(dB)                          : 6
Smart-roam SNR check interval(s)                             : 3
Smart-roam unable roam client expire time(min)               : 120
Smart-roam quick-kickoff SNR check interval(ms)              : 500
Smart-roam quick-kickoff SNR P-N observe time                : 6
Smart-roam quick-kickoff SNR P-N qualify time                : 4
AMC policy                                                   : auto-balance 
High density AMC optimize                                    : disable
DFS smart select                                             : enable
DFS recover delay time(min)                                  : 0
------------------------------------------------------------------------
Table 10-8  Description of the display rrm-profile name command output

Item

Description

PER threshold for trigger channel/power select(%)

PER threshold for triggering channel or power adjustment.

To configure this parameter, run the calibrate error-rate-threshold command.

Noise-floor threshold for trigger channel/power select(dBm)

Noise-floor threshold for triggering channel or power adjustment.

To configure this parameter, run the calibrate noise-floor-threshold command.

Calibrate tpc threshold(dBm)

Transmit Power Control (TPC) coverage threshold.

To configure this parameter, run the calibrate tpc threshold command.

Calibrate maximum TX power(dBm)

Maximum transmit power that can be adjusted through radio calibration.

To configure this parameter, run the calibrate max-tx-power command.

Calibrate minimum TX power(dBm)

Minimum transmit power that can be adjusted through radio calibration.

To configure this parameter, run the calibrate min-tx-power command.

Calibrate error rate check interval(min)

Interval for checking the BER.

To configure this parameter, run the calibrate error-rate-check command.

Calibrate error rate check traffic threshold(kbps)

Traffic threshold for checking the BER.

To configure this parameter, run the calibrate error-rate-check command.

Airtime fairness schedule

Whether to enable airtime fair scheduling.

To configure this parameter, run the airtime-fair-schedule enable command.

Dynamic adjust EDCA parameter

Whether to enable dynamic EDCA parameter adjustment.

To configure this parameter, run the dynamic-edca enable command.

Dynamic EDCA be-service threshold

Threshold for the dynamic EDCA Best-Effort service.

To configure this parameter, run the dynamic-edca threshold command.

UAC check client's SNR

Whether to enable user CAC based on terminal SNR.

To configure this parameter, run the uac enable command.

UAC client's SNR threshold(dB)

User CAC SNR threshold.

To configure this parameter, run the uac client-snr threshold command.

Action upon reaching the UAC threshold

Action to take when the number of access users reaches the user CAC threshold.
  • SSID hide: hiding the SSID
  • SSID broadcast: broadcasting the SSID
  • priority-based user replacement: allowing access of VIP users instead of non-VIP users based on priorities

To configure this parameter, run the uac reach-access-threshold command.

Band steer deny threshold

Maximum number of times an AP rejects association requests of a STA for band steering.

To configure this parameter, run the band-steer deny-threshold command.

Band steer SNR threshold(dB)

Start SNR threshold for triggering 5G-prior access.

To configure this parameter, run the band-steer snr-threshold command.

Band balance start threshold

Start threshold for load balancing between radios.

To configure this parameter, run the band-steer balance start-threshold command.

Band balance gap threshold(%)

Load difference threshold for load balancing between radios.

To configure this parameter, run the band-steer balance gap-threshold command.

Client's band expire based on continuous probe counts

Aging condition of terminal band information, that is, the number of times that an AP has continuously received Probe frames of a terminal from the same frequency band.

To configure this parameter, run the band-steer client-band-expire command.

Smart-roam

Whether to enable smart roaming.

To configure this parameter, run the smart-roam disable command.

Smart-roam quick kickoff

Whether to enable the function of quickly disconnecting STAs.

To configure this parameter, run the smart-roam quick-kickoff-threshold disable command.

Smart-roam check SNR

Whether to specify the trigger mode of smart roaming as check SNR.

To configure this parameter, run the smart-roam roam-threshold { check-snr | check-rate } command.

Smart-roam quick kickoff check SNR

Whether to enable the function of quickly disconnecting STAs is triggered by checking the SNR of STAs.

To configure this parameter, run the smart-roam quick-kickoff-threshold { check-snr | check-rate } command.

Smart-roam check rate

Whether to specify the trigger mode of smart roaming as check rate.

To configure this parameter, run the smart-roam roam-threshold { check-snr | check-rate } command.

Smart-roam quick kickoff check rate

Whether to enable the function of quickly disconnecting STAs is triggered by checking the rate of STAs.

To configure this parameter, run the smart-roam quick-kickoff-threshold { check-snr | check-rate } command.

Smart-roam standing SNR threshold(dB)

SNR threshold for smart roaming.

To configure this parameter, run the smart-roam roam-threshold { snr | rate } command.

Smart-roam SNR quick-kickoff-threshold(dB)

SNR-based threshold for quickly disconnecting STAs.

To configure this parameter, run the smart-roam quick-kickoff-threshold command.

Smart-roam rate threshold(%)

Rate threshold for smart roaming.

To configure this parameter, run the smart-roam roam-threshold { snr | rate } command.

Smart-roam rate quick-kickoff-threshold(%)

Rate-based threshold for quickly disconnecting STAs.

To configure this parameter, run the smart-roam quick-kickoff-threshold command.

Smart-roam high level SNR margin(dB)

Higher SNR difference threshold that triggers terminal roaming.

To configure this parameter, run the smart-roam snr-margin command.

Smart-roam low level SNR margin(dB)

Lower SNR difference threshold that triggers terminal roaming.

To configure this parameter, run the smart-roam snr-margin command.

Smart-roam SNR check interval(s)

Terminal SNR check interval.

To configure this parameter, run the smart-roam quick-kickoff-snr check-interval command.

Smart-roam unable roam client expire time(min)

Aging time of "unable to roam" record.

To configure this parameter, run the smart-roam unable-roam-client expire-time command.

Smart-roam quick-kickoff SNR check interval(ms)

Interval for checking the SNR to determine whether to quickly disconnect STAs.

To configure this parameter, run the smart-roam quick-kickoff-snr check-interval command.

Smart-roam quick-kickoff SNR P-N observe time

Number of PN observation times to determine whether to quickly disconnect STAs.

To configure this parameter, run the smart-roam quick-kickoff-snr p-n criteria command.

Smart-roam quick-kickoff SNR P-N qualify time

Number of times criteria are met to determine whether to quickly disconnect STAs.

To configure this parameter, run the smart-roam quick-kickoff-snr p-n criteria command.

AMC policy

Adaptive modulation and coding (AMC) algorithm.

To configure this parameter, run the amc-policy command.

High density AMC optimize

Whether to enable the AMC optimization function in high-density scenarios.

To configure this parameter, run the high-density amc-optimize enable command.

DFS smart select

Whether to enable DFS smart selection.
  • enable: DFS smart selection is enabled.
  • disable: DFS smart selection is disabled.

To configure this parameter, run the dfs smart-selection disable command.

DFS recover delay time(min)

Delay in switching back the DFS channel.

To configure this parameter, run the dfs recover-delay command.

Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 208417

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next