No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display fib interface

display fib interface


The display fib interface command displays information about FIB entries with a specified outbound interface.


display fib interface interface-type interface-number


Parameter Description Value
interface-type interface-number Specifies the type and number of the outbound interface to a specified destination address. -


All views

Default Level

1: Monitoring level

Usage Guidelines



# Display FIB entries with a specified outbound interface.

<Huawei> display fib interface vlanif10
Destination/Mask   Nexthop    Flag TimeStamp   Interface        TunnelID    U    t[115]     Vlanif10           0x0
Table 6-100  Description of the display fib interface command output




Destination address or mask length.


Next hop.


Current flag, which is the combination of G, H, U, S, D, and B.
  • G (gateway route): indicates that the next hop is a gateway.

  • H (host route): indicates that the route is a host route.

  • U (available route): indicates that the route status is Up.

  • S: indicates a static route.

  • D: indicates a dynamic route.

  • B (blackhole route): indicates that the next hop is a null interface.


Timestamp, which indicates the lifetime of an entry, in seconds.


Outbound interface to the destination address.


Index of a forwarding entry. It is used in packet forwarding between the upstream and downstream boards. If the value is not 0, packets matching the entry are forwarded through the MPLS tunnel. If the value is 0, packets matching the entry are not forwarded through the MPLS tunnel.

Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 207090

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next