No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
pppoe-client dial-bundle-number

pppoe-client dial-bundle-number

Function

The pppoe-client dial-bundle-number command specifies a dialer bundle of a PPPoE session on an interface.

The undo pppoe-client dial-bundle-number command unbinds the dialer bundle from the PPPoE session.

By default, no dialer bundle is specified.

Format

pppoe-client dial-bundle-number number [ on-demand ] [ no-hostuniq ] [ ppp-max-payload value ] [ service-name name ]

undo pppoe-client dial-bundle-number number

Parameters

Parameter Description Value
number Specifies the dialer bundle of a PPPoE session. The value is an integer that ranges from:
  • 1 to 4 for common APs
  • 1 to 8 for central APs
This parameter uniquely identifies a PPPoE session and can be used as the ID of a PPPoE session.
on-demand Configures on-demand dialing on the PPPoE client. -
no-hostuniq Indicates that the session initiated by the PPPoE client does not contain the Host-Uniq field.

By default, the session initiated by the PPPoE client contains the Host-Uniq field.

-
ppp-max-payload value Specifies the maximum value of the MTU of PPP negotiation during the establishment of a PPPoE session. The value is an integer that ranges from 64 to 1976. The default value is 1500.
service-name name Specifies the value of the Service-Name field in packets sent by a PPPoE client in the Discovery stage.

When users want to establish sessions with the PPPoE server providing specific services, specify service-name in this command.

The value is a string of 1 to 128 case-sensitive characters without spaces and special characters such as asterisk (*), question mask (?), and quotation mask (").

Views

VLANIF interface view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

When a device serves as a PPPoE client, PPPoE sessions can be configured on a VLANIF interface.

Prerequisites

A dialer interface has been configured before the PPPoE session configuration.

Precautions

  • If on-demand is not specified, the PPPoE session works in permanent online mode. If this parameter is specified, the PPPoE session works in on-demand dialing mode. The device supports the packet triggering mode for on-demand dialing.

    • In permanent online mode, the device initiates a PPPoE session immediately after the physical link becomes Up. The PPPoE session persists until you use the undo pppoe-client dial-bundle-number number command to delete it.
    • In triggered online mode, the device does not initiate a PPPoE session immediately after the physical link becomes Up. Instead, the device initiates a PPPoE session only when data needs to be transmitted on the link. If the maximum idle time of the PPPoE link expires, the device terminates the PPPoE session. When data needs to be transmitted on the PPPoE link, the device sets up the PPPoE session again.
    • The undo pppoe-client dial-bundle-number number command deletes a PPPoE session permanently regardless of the working mode of the session. To establish the session again, run the pppoe-client dial-bundle-number command.
    • A VLANIF interface can be configured with multiple PPPoE sessions. That is, a VLANIF interface can be associated with multiple dialer bundles, but a dialer bundle can be associated with only one VLANIF interface. One PPPoE session can be bound to only one dialer bundle.

  • If no-hostuniq is not specified, the PPPoE session initiated by the PPPoE client contains the Host-Uniq field. The PPPoE client uses this field to associate an access server response with a particular host request, which ensures strict check.

Example

# Specify dialer bundle 1 for the PPPoE session on VLANIF 1.

<Huawei> system-view
[Huawei] interface vlanif 1
[Huawei-Vlanif1] pppoe-client dial-bundle-number 1
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 207706

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next