No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display station

display station

Function

The display station command displays access information about STAs.

Format

display station { sta-mac sta-mac-address | all | interface interface }

Parameters

Parameter

Description

Value

sta-mac sta-mac-address

Displays access information about a STA with the specified MAC address.

The STA's MAC address must exist.

all

Displays access information about all STAs.

-

interface interface

Displays access information about STAs on a specified radio interface.

The radio interface must exist.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

You can run the display station command to view access information about STAs. Access information about STAs can be filtered based on STA's MAC address and radio interfaces. You can run the display access-user command to view access information about online wired and wireless users. The information includes users' authentication, authorization, and accounting information. To view details about user authentication, authorization, and accounting information, run the display access-user command.

Example

# Display access information about all STAs.

<Huawei> display station all
Rf/WLAN: Radio ID/WLAN ID
Rx/Tx: link receive rate/link transmit rate(Mbps)
----------------------------------------------------------------------------------------------------
STA MAC           Ap name         Rf/WLAN  Band  Type  Rx/Tx      RSSI  VLAN  IP address  SSID
----------------------------------------------------------------------------------------------------
14cf-9208-9abf    1047-8007-6f80  0/2      2.4G  11n   3/8        -70   10    10.10.10.253 tap1
----------------------------------------------------------------------------------------------------
Total: 1 2.4G: 1 5G: 0
Table 8-17  Description of the display station all command output

Item

Description

STA MAC

STA's MAC address.

Ap name

AP name.

Rf/WLAN

Radio ID/WLAN ID of a VAP.

Band

Frequency band of a radio.

Type

Protocol type of a radio.

Rx/Tx

Rate at which the AP receives packets from the STA/Rate at which the AP sends packets to the STA.

RSSI

RSSI of a STA.

VLAN

VLAN ID of a STA.

IP address

IP address of a STA.

This item is displayed only when the IPv6 function of the STA is disabled.

IPv4 address

IPv4 address of a STA.

This item is displayed only when the IPv6 function of the STA is enabled. To enable the IPv6 function of the STA, run the sta-ipv6-service enable command.

IPv6 address

IPv6 address of a STA.

This item is displayed only when the IPv6 function of the STA is enabled. To enable the IPv6 function of the STA, run the sta-ipv6-service enable command.

SSID

SSID name.

# Display access information about a specified STA.

<Huawei> display station sta-mac b878-2eb4-2689
------------------------------------------------------------------------------
Station MAC-address                       : b878-2eb4-2689
Station IP-address                        : 10.2.2.254
                                          : FE80::C87:23F4:A6D:8D03
Station gateway                           : 10.2.2.2
Associated SSID                           : jsldoc
Station online time(ddd:hh:mm:ss)         : 000:00:03:14
The upstream SNR(dB)                      : 80.0
The upstream aggregate receive power(dBm) : -28.0
Station connect rate(Mbps)                : 61
Station connect channel                   : 36
Station inactivity time(ddd:hh:mm:ss)     : 000:00:00:00
Station current state
  Authorized for data transfer            : YES
  QoS enabled                             : YES
  HT rates enabled                        : YES
  Power save mode enabled                 : YES
  Auth reference held                     : No
  UAPSD enabled                           : No
  UAPSD triggerable                       : No
  UAPSD SP in progress                    : No
  This is an ATH node                     : No
  WDS workaround req                      : No
  WDS link                                : No
  PMF negotiation                         : No
Station's HT capability                   : WQ
Station capabilities                      : E
Station PMF capabilities                  : PMFC=0,PMFR=0
Station VHT capabilities
  256QAM capabilities                     : YES
  VHT explicit beamforming capabilities   : YES
  MU-MIMO capabilities                    : YES
Station HE capabilities
  ofdma capabilities                      : No
  bss color capabilities                  : No
Station's RM capabilities
  Neighbor Report                         : YES
  Beacon Passive Measurement              : YES
  Beacon Active Measurement               : YES
  Beacon Table Measurement                : YES
Station's RSSI(dBm)                       : -28
Station's radio mode                      : 11n
Station's AP ID                           : 0
Station's AP Name                         : area_3
Station's Radio ID                        : 1
Station's Authentication Method           : OPEN
Station's Cipher Type                     : NO CIPHER
Station's User Name                       : b8782eb42689
Station's Vlan ID                         : 22
Station's Channel Band-width              : 20MHz
Station's asso BSSID                      : dcd2-fc04-b513
Station's state                           : Asso with auth
Station's QoS Mode                        : WMM
Station's HT Mode                         : HT20
Station's MCS value                       : 9
Station's NSS value                       : 2
Station's Short GI                        : nonsupport
Station's roam state                      : No
Station supported band                    : 2.4G/5G
Station support 802.11k                   : Yes
Station support 802.11r                   : Yes
Station support 802.11v                   : No
Station device type                       : windows
U-APSD list:
-------------------------------------------------------
AC-VI          AC-VO        AC-BE         AC-BK
-------------------------------------------------------
not-support  not-support  not-support  not-support
-------------------------------------------------------
------------------------------------------------------------------------------
Table 8-18  Description of the display station sta-mac sta-mac-address command output

Item

Description

Station MAC-address

MAC address of a STA.

Station IP-address

IP address of a STA.

Station gateway

Gateway address of a STA.
NOTE:

If the device obtains the STA's gateway address through DHCP, the parameter displays as the obtained gateway address; otherwise, the parameter displays as 0.0.0.0.

Associated SSID

SSID of a service set with which a STA is associated.

Station online time(ddd:hh:mm:ss)

Online duration of a STA, in the format of ddd:hh:mm:ss.

The upstream SNR(dB)

SNR of a STA received by an AP, in dB.

The upstream aggregate receive power(dBm)

Transmit power of a STA received by an AP, in dBm.

Station connect rate(Mbps)

Connection rate of a STA, in Mbit/s.

Affected by wireless environments, antenna angles, and other factors, the actual connection rate of a STA cannot reach the upper limit.

Station connect channel

Channel used by a STA.

Station inactivity time(ddd:hh:mm:ss)

Idle duration of a STA, in the format of ddd:hh:mm:ss.

Station current state

Current status of a STA.

Authorized for data transfer

Whether a STA is authenticated.

QoS enabled

Whether QoS is enabled on a STA.

HT rates enabled

Whether 802.11n is enabled on a STA.

Power save mode enabled

Whether the power saving mode is enabled on a STA.

Auth reference held

Whether the authentication reference flag is set.

UAPSD enabled

Whether UAPSD is enabled.

UAPSD triggerable

UAPSD can be triggered, waiting for a STA to send a trigger frame to the AP.

UAPSD SP in progress

Whether the UAPSD mode is in the service period (SP).

This is an ATH node

Whether the wireless network adapter uses the Atheros chip.

WDS workaround req

Whether a patch is used to fix bugs of Atheros owl series chips in WDS scenarios.

WDS link

STA that is a node on the WDS link.

PMF negotiation

Whether a STA implements the PMF negotiation.

Station's HT capability

HT capability of a STA.
  • A: Advanced coding
  • W: HT40 channel width
  • P: MIMO power save enabled
  • Q: Static MIMO power save
  • R: Dynamic MIMO power save
  • G: Greenfield preamble
  • S: Short GI enabled (HT40)
  • D: Delayed block ACK
  • M: Max AMSDU size

Station capabilities

Capabilities of a STA.

Station PMF capabilities

PMF capability of a STA.

Station VHT capabilities

Whether a STA supports 802.11ac.

256QAM capabilities

Whether a STA supports 256QAM.

VHT explicit beamforming capabilities

Whether a STA supports 802.11ac explicit beamforming.

MU-MIMO capabilities

Whether a STA supports MU-MIMO.

Station HE capabilities

Whether a STA supports 802.11ax.

ofdma capabilities

Whether a STA supports OFDMA.

bss color capabilities

Whether a STA supports BSS Color.

Station's RM capabilities

Radio management capability of a STA.

Neighbor Report

Whether a STA can obtain information about neighboring APs.

Beacon Passive Measurement

Whether a STA can report information about neighboring APs in passive mode.

Beacon Active Measurement

Whether a STA can report information about neighboring APs in active mode.

Beacon Table Measurement

Whether a STA can report information about neighboring APs in Beacon table mode.

Station's RSSI(dBm)

Received signal strength indicator (RSSI) of a STA, in dBm.

Station's radio mode

Radio mode of a STA.

Station's AP ID

AP ID associated with a STA.

Station's AP Name

Name of the AP which a STA associates with.

Station's Radio ID

Radio ID of a STA.

Station's Authentication Method

Authentication mode of a STA.

Station's Cipher Type

Encryption mode of a STA.

Station's User Name

User name of a STA.

Station's Vlan ID

VLAN ID of a STA.

Station's Channel Band-width

Channel bandwidth of a STA.

Station's asso BSSID

BSSID that the STA associates with.

Station's state

Status of the STA.

Station's QoS Mode

QoS mode of the STA.

Station's HT Mode

HT mode of the STA.

Station's MCS value

The maximum MCS value of the STA.

Station's NSS value

NSS value of the STA.

NOTE:
The NSS value is displayed for STAs working only in 802.11ac mode or STAs working in 802.11n mode and supporting 256QAM.

Station's Short GI

Whether the STA supports the short GI.

Station's roam state

Roaming state of a STA.

Station supported band

Bandwidth supported by a STA.

Station support 802.11k

Whether a STA supports 802.11k.

Only cloud APs support this parameter.

Station support 802.11r

Whether a STA supports 802.11r.

Only cloud APs support this parameter.

Station support 802.11v

Whether a STA supports 802.11v.

Only cloud APs support this parameter.

Station device type

Identified STA type.

U-APSD list

U-APSD list.

AC-VI

Whether U-APSD takes effect on AC_VI packets.

AC-VO

Whether U-APSD takes effect on AC_VO packets.

AC-BE

Whether U-APSD takes effect on AC_BE packets.

AC-BK

Whether U-APSD takes effect on AC_BK packets.

Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 202269

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next