No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
switch-probe-interval

switch-probe-interval

Function

The switch-probe-interval command specifies the Mesh handover probe interval.

The undo switch-probe-interval command restores the default Mesh handover probe interval.

The default Mesh handover probe interval is 60 seconds.

Format

switch-probe-interval interval

undo switch-probe-interval

Parameters

Parameter

Description

Value

interval

Specifies the Mesh handover probe interval.

The value is an integer that ranges from 10 to 300, in seconds.

Views

Mesh profile view

Default Level

2: Configuration level

Usage Guidelines

In vehicle-ground communication scenarios, if a train switches its traveling line, configure Mesh parameters for vehicle-mounted APs that may switch between multiple lines. This ensures normal vehicle-ground communication. A vehicle-mounted AP attempts to set up links with trackside APs configured in the corresponding Mesh profile by the order in which the profiles are referenced. If the link setup fails after the probe interval elapses, the vehicle-mounted AP attempts to set up a links using the next Mesh profile. If the vehicle-mounted AP fails to set up with trackside APs using any Mesh profile, the AP initiates link setup again by the order in which the profiles are referenced until a link is successfully set up.

Example

# Create the Mesh profile test and set the Mesh handover probe interval to 15 seconds.

<Huawei> system-view
[Huawei] wlan
[Huawei-wlan-view] mesh-profile name test
[Huawei-wlan-mesh-prof-test] switch-probe-interval 15
Related Topics
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 205296

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next