No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
calibrate noise-floor-threshold

calibrate noise-floor-threshold

Function

The calibrate noise-floor-threshold command specifies the noise floor threshold for triggering radio calibration.

The undo calibrate noise-floor-threshold command restores the default noise floor threshold for triggering radio calibration.

The default noise floor threshold for triggering radio calibration is -75 dBm.

Format

calibrate noise-floor-threshold threshold

undo calibrate noise-floor-threshold

Parameters

Parameter

Description

Value

noise-floor-threshold threshold

Specifies the noise floor threshold for triggering radio calibration.

The value is an integer that ranges from -95 to 0, in dBm.

Views

RRM profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

The noise floor indicates the noise strength in the current environment. A high noise floor value will make noise drown out valid data, affecting user services.

The noise floor threshold for triggering radio calibration can be used to determine whether the environment noise is normal. When detecting a noise floor value higher than the threshold, an RU reports a high noise floor message to the central AP. The central AP then performs radio calibration to avoid channels with high noise floor values to improve user experience.

Example

# Set the noise floor threshold for triggering radio calibration to -60 dBm.

<Huawei> system-view
[Huawei] wlan
[Huawei-wlan-view] rrm-profile name default
[Huawei-wlan-rrm-prof-default] calibrate noise-floor-threshold -60
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 209299

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next