No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display snmp-agent trap feature-name radius all

display snmp-agent trap feature-name radius all

Function

The display snmp-agent trap feature-name radius all command displays the status of all traps on the RDS module.

Format

display snmp-agent trap feature-name radius all

Parameters

None

Views

All views

Default Level

3: Management level

Usage Guidelines

Usage Scenario

After enabling the trap function for the RDS module, you can run this command to check the status of all traps on the RDS module. To enable the trap function for the RDS module, run the snmp-agent trap enable feature-name radius command.

Prerequisites

The SNMP function has been enabled on the device.

Example

# Display the status of all traps on the RDS module.

<Huawei>display snmp-agent trap feature-name radius all
------------------------------------------------------------------------------                                                      
Feature name: radius                                                                                                                
Trap number : 4                                                                                                                     
------------------------------------------------------------------------------                                                      
Trap name                       Default switch status   Current switch status                                                       
hwRadiusAuthServerUp            off                     off                                                                         
hwRadiusAuthServerDown          off                     off                                                                         
hwRadiusAcctServerUp            off                     off                                                                         
hwRadiusAcctServerDown          off                     off
Table 26-33  Description of the display snmp-agent trap feature-name radius all command output

Item

Description

Feature name

Name of the module to which a trap belongs.

Trap number

Number of traps.

Trap name

Name of a trap. Traps on the RDS module include:

  • hwRadiusAuthServerUp: The device sends a Huawei proprietary trap when it detects that communication with the RADIUS authentication server is restored.

  • hwRadiusAuthServerDown: The device sends a Huawei proprietary trap when it detects that communication with the RADIUS authentication server is interrupted.

  • hwRadiusAcctServerUp: The device sends a Huawei proprietary trap when it detects that communication with the RADIUS accounting server is restored.

  • hwRadiusAcctServerDown: The device sends a Huawei proprietary trap when it detects that communication with the RADIUS accounting server is interrupted.

Default switch status

Default status of the trap function:
  • on: The trap function is enabled by default.

  • off: The trap function is disabled by default.

Current switch status

Trap status:

  • on: The trap is enabled.

  • off: The trap is disabled.

Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 203438

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next