No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
snmp-agent trap source

snmp-agent trap source


The snmp-agent trap source command sets the source interface from which traps are sent.

The undo snmp-agent trap source command removes the set source interface configuration.

By default, source interface is not set.


snmp-agent trap source interface-type interface-number

undo snmp-agent trap source


Parameter Description Value
interface-type interface-number Specifies the type and number of the source interface that sends traps. -


System view

Default Level

3: Management level

Usage Guidelines

Usage Scenario

You can run the snmp-agent trap source command to specify the type and number of the interface on the device from which traps are sent. The system specifies the IP address of this interface as the source IP address of traps. In this way, the trap source can be identified on the NMS.


The source interface that sends traps must have an IP address; otherwise, the commands will fail to take effect.

To ensure device security, it is recommended that you set the source IP address to the local loopback address.

The source interface in traps on the device must be the same as the source interface specified on the NM station. Otherwise, the NM station cannot receive traps.


# Specify the IP address of VLANIF100 as the source address of traps.

<Huawei> system-view
[Huawei] snmp-agent trap source vlanif 100
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 208183

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next