No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
capwap source ip-address

capwap source ip-address


The capwap source ip-address command configures the source IP address for a Central AP.

The undo capwap source ip-address command restores the source IP address of a Central AP to the default setting.

By default, no source IP address is configured for a Central AP.By default, source IP address is configured for a Cloud Central AP.


capwap source ip-address ip-address

undo capwap source ip-address






Specifies a source IPv4 address for a Central AP.

The value is in dotted decimal notation.


System view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

A Central AP uses a unique source IP address. All RUs connected to the Central AP can learn the source IP address and use the IP address to communicate with the Central AP.


# Configure the source IP address of the Central AP as

<Huawei> system-view
[Huawei] vlan batch 100
[Huawei] interface vlanif 100
[Huawei-Vlanif100] ip address 24
[Huawei-Vlanif100] quit
[Huawei] capwap source ip-address
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 204430

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next