No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ip soft-forward enhancement disable

ip soft-forward enhancement disable

Function

The ip soft-forward enhancement disable command disables the enhanced forwarding function for control packets generated by the device.

The undo ip soft-forward enhancement disable command enables the enhanced forwarding function for control packets generated by the device.

By default, the enhanced forwarding function is enabled for control packets generated by the device.

The AD9431DN-24X does not support this command.

Format

ip soft-forward enhancement disable

undo ip soft-forward enhancement disable

Parameters

None.

Views

System view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

You can configure forwarding policies (such as QoS policies) for data packets to implement differentiated services. In some scenarios, you may need to manage control packets generated by the device to process different control packets. For example, carriers have limited the bandwidth of data packets through QoS policies and also want to limit the bandwidth of control packets. In this situation, QoS policies take effect only for data packets. You can configure the enhanced forwarding function to make QoS policies take effect for control packets. Currently, the enhanced forwarding function is valid only for the control packets generated by the device but not for the control packets forwarded by other devices.

You can run the undo ip soft-forward enhancement disable command to enable the enhanced forwarding function for control packets generated by the device.

Follow-up Procedures

After enabling the enhanced forwarding function on the device, you can perform some configurations on the control packets generated by the device. For example, you can configure different QoS policies for different types of packets generated by the device.

Example

# Disable the enhanced forwarding function for control packets generated by the device.
<Huawei> system-view
[Huawei] ip soft-forward enhancement disable
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 205296

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next