No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
check (user-defined signature rule view)

check (user-defined signature rule view)


The check command configures the matching order of user-defined signature rules.

The undo check command restores the default configuration.


check { sequential | random-order }

undo check


Parameter Description Value
sequential Indicates that user-defined signature rules are matched sequentially. -
random-order Indicates that user-defined signature rules are matched in random order. -


User-defined signature rule view

Default Level

2: Configuration level

Usage Guidelines

User-defined signature rules are matched in random order by default.

If you select sequential, conditions are matched in ascending order by ID. An intrusion matches a rule only when the intrusion matches all conditions of the rule in configuration order.

If you select random-order, conditions are matched in random order. An intrusion matches a rule when the intrusion matches all conditions of the rule in either configuration order or random order.

Selecting sequential is not recommended. If you select it, the matching order becomes stricter, which may cause false positives during intrusion detection. Sequential check does not apply to value match (including:equal, gthan, lthan, and noequal).


# Create user-defined signature rule hello in user-defined signature 1 and set the matching order to sequential.

<Huawei> system-view
[Huawei] ips signature-id 1
[Huawei-ips-signature-1] protocol TCP  
[Huawei-ips-signature-1] rule name hello
[Huawei-ips-signature-1-rule-hello] check sequential
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 203434

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next