No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display default-parameter interface

display default-parameter interface

Function

The display default-parameter interface command displays the default interface configuration, including the interface status, MTU, interval for collecting traffic statistics, alarm threshold, interface description, whether the alarm function is enabled to send an alarm to the NMS when the interface status changes.

Format

display default-parameter interface interface-type interface-number

Parameters

Parameter Description Value
interface-type interface-number Displays the default configuration of a specified interface. -

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

Default configurations are not saved in the configuration file. To check the default configuration of an interface, run the display default-parameter interface command on the interface.

The displayed information varies according to interfaces.

Example

# Display the default configuration of GE0/0/1.
<Huawei> display default-parameter interface gigabitethernet 0/0/1 
 Interface state: undo shutdown                                                 
 Flow-stat interval: 300s                                                       
 Trap-threshold: input-rate 100, output-rate 100                                
 Snmp trap updown: enable                                                       
 Description: HUAWEI, AP Series, GigabitEthernet0/0/1 Interface 
# Display the default configuration of the VLANIF 2 interface.
<Huawei> display default-parameter interface vlanif 2 
 Interface state: undo shutdown                                                 
 MTU: 1500                                                                      
 Flow-stat interval: 300s                                                       
 Description: HUAWEI, AP Series, Vlanif2 Interface            
Table 5-1  Description of the display default-parameter interface command output

Item

Description

Interface state

Default status of an interface:

  • shutdown: The default status of a physical interface is shutdown.
  • undo shutdown: The default status of a logical interface is undo shutdown.

To change the interface status, run the shutdown command or the undo shutdown command in the interface view.

MTU

Default MTU value of the interface.

Flow-stat interval

Interval for collecting traffic statistics on the interface.

To set the interval for collecting traffic statistics on an interface, run the set flow-stat interval (interface view) command in the interface view.

Trap-threshold

Alarm threshold for outbound and inbound bandwidth usage on the interface.

To set the alarm threshold for outbound and inbound bandwidth usage on an interface, run the trap-threshold command in the interface view.

Snmp trap updown

Whether an alarm is sent to the NMS when the interface status changes:

  • disable: No alarm is sent to the NMS when the interface status changes.
  • enable: An alarm is sent to the NMS when the interface status changes.

To configure an interface to send an alarm to the NMS when the interface status changes, run the enable snmp trap updown command in the interface view.

Description

Interface description.

To configure the description for an interface, run the description (interface view) command in the interface view.

Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 200738

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next