No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
url-parameter set

url-parameter set

Function

The url-parameter set command sets redirection parameter values.

The undo url-parameter set command restores the default setting.

By default, the device automatically obtains redirection parameter values.

Format

Fat central AP:

url-parameter set ac-ip ip-address

url-parameter set ac-ip interface interface-type interface-number

undo url-parameter set ac-ip

Common Fat AP:

url-parameter set ap-ip ip-address

url-parameter set ap-ip interface interface-type interface-number

undo url-parameter set ap-ip

Parameters

Parameter

Description

Value

ac-ip

Sets the value of the redirection parameter ac-ip.

-

ip-address

Sets the value of a redirection parameter to a specified IP address.

The value is in dotted decimal notation.

interface interface-type interface-number

Sets the value of a redirection parameter to the IP address of an interface.

-

ap-ip

Sets the value of the redirection parameter ap-ip.

-

Views

URL template view

Default Level

2: Configuration level

Usage Guidelines

After parameters in a URL are configured using the url-parameter command, you can run the url-parameter set command to set values for these parameters. If a parameter is not specified in the url-parameter command, the URL does not carry this parameter even if a value is set for it. When the ac-ip parameter is set to the IP address of an interface but the interface does not have any IP address, the IP address of the CAPWAP gateway is used as the value of ac-ip. If the value of a redirection parameter is set to the IP address of an interface, the URL carries the new IP address if the interface IP address is modified, and the parameter value configuration is deleted after the interface is deleted.

When multiple commands are configured to specify the value of the same parameter, the last configured one takes effect. If multiple commands among url-parameter set ac-ip ip-address, url-parameter set ac-ip ipv6 ipv6–address, url-parameter set ac-ip interface interface-type interface-number, and url-parameter set ac-ip ipv6 interface interface-type interface-number are configured, the last configured one takes effect.

Example

# Set the value of the redirection parameter ap-ip to 10.1.1.1.

<Huawei> system-view
[Huawei] url-template name huawei
[Huawei-url-template-huawei] url-parameter set ap-ip 10.1.1.1
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 196686

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next