No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
schedule reboot

schedule reboot

Function

The schedule reboot command configures the scheduled restart of a device and set the specific time when the device restarts or the delay time before the device restarts.

The undo schedule reboot command disables the scheduled restart function.

By default, the scheduled restart is disabled.

Format

schedule reboot { at time | delay interval }

undo schedule reboot

Parameters

Parameter Description Value
at time Specifies the device restart time. The format of time is hh:mm YYYY-MM-DD. The restart time must be later than the current device time by less than 720 hours.YYYY-MM-DD indicates year, month, and date and is optional.
  • hh indicates hour and the value ranges from 0 to 23.
  • mm indicates minute and the value ranges from 0 to 59.
  • YYYY indicates year and the value ranges from 2000 to 2099.
  • MM indicates month and the value ranges from 1 to 12.
  • DD indicates date and the value ranges from 1 to 31.
delay interval Specifies the delay time before the device restarts. The format of interval is hh:mm or mm. The delay time must be no more than 720 hours.
  • In hh:mm, hh indicates hour and the value ranges from 0 to 720 and mm indicates minute and the value ranges from 0 to 59.
  • mm indicates minute and the value ranges from 0 to 43200.

Views

User view

Default Level

3: Management level

Usage Guidelines

Usage Scenario

When upgrading or restarting the device, you can configure the device to restart at time when few services are running to minimize the impact on services.

Precautions

  • If the schedule reboot at command is used to set a specific date (YYYY-MM-DD) and the date is a future date, the device restarts at the specified time, with an error within 1 minute. If no date is set, two situations occur: If the specified time is later than the current time, the device restarts at the specified time of the day. If the specified time is earlier than the current time, the device restarts at the set time next day.

  • Note that the gap between the specified date and current date must be shorter than or equal to 720 hours If the scheduled restart has been configured, the latest configuration overrides the previous one.

  • The scheduled restart function becomes invalid when you use the clock datetime command to set the system time to over 10 minutes later than the restart time set by the schedule reboot command. If the time difference is equal to or less than ten minutes, the device immediately restarts and does not save the configuration.

  • This command restarts the device at the specified time, interrupting all services on the device. Therefore, do not use this command when the device is running properly.

  • Before restarting the device, ensure that the configuration file has been saved.

Example

# Configure the device to restart at 22:00.

<Huawei> schedule reboot at 22:00
Info:Reboot system at 22:00:00 2012/07/25(in 10 hours and 10 minutes) confirm?[Y
/N]:y
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 204120

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next