No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display current power-workmode

display current power-workmode


The display current power-workmode command displays the current power mode of an AP.

All APs support this command except the AD9430DN-24 and AD9431DN-24X.


display current power-workmode




All views

Default Level

1: Monitoring level

Usage Guidelines

When an AP is supplied with DC or PoE power, the power may fail to enable the AP to work with the maximum power. You can run this command to view the current power mode of the AP.


# Display the current power mode of an AP.

<Huawei> display current power-workmode
 Current power workmode is AT (FULL), decided by AP capability 
Table 4-44  Description of the display current power-workmode command output



Current power workmode is AT (FULL), decided by AP capability
The AP's current power mode is 802.3at (without restricting functions of the AP). An AP's current power mode is determined by its own highest capability.
  • The power mode of an AP can be AF, AT, or BT, which represents 802.3af, 802.3at, or 802.3bt, respectively.
  • The working mode of an AP can be Full, Limited, or Disabled. In Full mode, functions of the AP are unrestricted. In Limited mode, functions of the AP are partially restricted. In Disabled mode, the AP restarts due to insufficient power supply, and you are not advised to use the AP in this mode.
  • The current power mode of an AP is determined by LLDP, hardware detect, or AP capability, which respectively represent the LLDP negotiation result, hardware detection result, and the AP's own highest capability.
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 202780

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next