No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
reset pki ocsp server down-information

reset pki ocsp server down-information


The reset pki ocsp server down-information command clears the DOWN status information of the OCSP server recorded on the device.


reset pki ocsp server down-information [ url [ esc ] url-addr ]


Parameter Description Value
url [ esc ] url-addr

Specifies the OCSP server's URL address. If no URL address is specified, clear the DOWN status information on all OCSP servers.

If the esc parameter is specified, the URL address in ASCII format is supported.

The value is a string starting with http:// and consisting of 1 to 128 case-sensitive characters without spaces.


User view

Default Level

3: Management level

Usage Guidelines

There is a mechanism to determine whether the OCSP server is down. When the OCSP server corresponding to a URL cannot be accessed, the server status is set to DOWN. In this case, the device will not send OCSP requests to the URL for 10 minutes.

However, this mechanism may falsely set the state of a transiently disconnected server to DOWN. Using this command, the user can manually clear the falsely reported DOWN state of the OCSP server so that the device can send OCSP requests to the server.

The keyword esc supports the entering of URLs that include the question mark (?) in the ASCII code. The URL must be in \x3f format, and 3f is the hexadecimal ASCII code for the question mark (?). For example, if a user wants to enter http://***.com?page1, the URL is http://***.com\x3fpage1. If a user wants to enter http://www.***.com?page1\x3f that includes both a question mark (?) and \x3f, the URL is http://www.***.com\x3fpage1\\x3f.


# Clear the OCSP server DOWN information of the specified URL.

<Huawei> reset pki ocsp server down-information
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 199179

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next