No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
hwtacacs-server accounting

hwtacacs-server accounting


The hwtacacs-server accounting command configures an HWTACACS accounting server.

The undo hwtacacs-server accounting command cancels the configuration.

By default, no HWTACACS accounting server is configured.


hwtacacs-server accounting ip-address [ port ] [ public-net ] [ secondary | third ]

undo hwtacacs-server accounting [ secondary | third ]






Specifies the IP address of an HWTACACS accounting server.

The value is a valid unicast address in dotted decimal notation.


Specifies the port number of an HWTACACS accounting server.

The value is an integer that ranges from 1 to 65535. The default value is 49.


Indicates that the HWTACACS accounting server is connected to the public network.



Configures the second HWTACACS accounting server as the standby server. If no standby server is configured, the primary HWTACACS accounting server is specified.



Specifies the third HWTACACS accounting server as the secondary server. If no secondary server is configured, the primary HWTACACS accounting server is specified.



HWTACACS server template view

Default Level

3: Management level

Usage Guidelines

Usage Scenario

The device does not support local accounting; therefore, you need to configure an HWTACACS accounting server to perform accounting. The device sends accounting packets to an HWTACACS accounting server only after the accounting server is specified in an HWTACACS server template.


  • You can modify this configuration only when device does not set up TCP connection with the specified accounting server.

  • The IP addresses of the primary and secondary servers must be different. Otherwise, the server configuration fails.

  • If the command is run for multiple times in the same HWTACACS server template to configure the servers with the same type (for example, the servers are all primary servers), only the latest configuration takes effect.


# Configure the primary HWTACACS accounting server.

<Huawei> system-view
[Huawei] hwtacacs-server template test1
[Huawei-hwtacacs-test1] hwtacacs-server accounting 52
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 205408

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next