No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
source-port (user-defined signature rule view)

source-port (user-defined signature rule view)

Function

The source-port command specifies the source port to be checked by a user-defined signature rule.

The undo source-port command deletes the source port to be checked by a user-defined signature rule.

Format

source-port { start-port end-port | any }

undo source-port

Parameters

Parameter Description Value
start-port

Specifies the start port of a port range to be checked by the user-defined signature rule.

The value is an integer ranging from 1 to 65535.

end-port

Specifies the end port of a port range to be checked by the user-defined signature rule.

The value is an integer ranging from 1 to 65535.

The value of end-port must be no smaller than that of start-port.

any

Indicates that all source ports are checked by the user-defined signature rule.

-

Views

User-defined signature rule view

Default Level

2: Configuration level

Usage Guidelines

All source ports are checked by the user-defined signature rule by default.

Example

# Create user-defined signature rule hello in user-defined signature 1 and set the source port range to a range from 80 to 8080.

<Huawei> system-view
[Huawei] ips signature-id 1
[Huawei-ips-signature-1] protocol TCP  
[Huawei-ips-signature-1] rule name hello
[Huawei-ips-signature-1-rule-hello] source-port 80 8080
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 196734

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next