No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
reset auto-defend attack-source

reset auto-defend attack-source


The reset auto-defend attack-source command clears information about attack sources.


reset auto-defend attack-source




User view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

To view the latest attack source information on the device, run the reset auto-defend attack-source command to delete the existing attack source information, wait for a period, and run the display auto-defend attack-source command.


After the reset auto-defend attack-source command is run, information about attack sources is cleared and cannot be restored.


# Delete existing attack source information on the device.

<Huawei> reset auto-defend attack-source
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 248328

Downloads: 140

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next