No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display ble-profile

display ble-profile

Function

The display ble-profile command displays configuration and reference information about a BLE profile.

Only cloud APs support this command.

Format

display ble-profile { all | name profile-name }

Parameters

Parameter Description Value
all Displays information about all BLE profiles. -
name profile-name Displays information about the BLE profile with a specified name. The BLE profile name must exist.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

You can run this command to view configuration and reference information about a BLE profile.

Example

# Display information about all BLE profiles.

<Huawei> display ble-profile all
---------------------------------------------------------------------------
Profile name                        Reference
---------------------------------------------------------------------------
huawei                              1
---------------------------------------------------------------------------
Total: 1
Table 21-1  Description of the display ble-profile all command output

Item

Description

Profile name

BLE profile name.

Reference

Number of times a BLE profile is referenced.

# Display information about BLE profile huawei.

<Huawei> display ble-profile name huawei
------------------------------------------------------------------------------
Broadcaster switch            : disable
Broadcaster interval(ms)      : 500
Broadcaster content
  UUID                        : 00000000000000012345678123456789(hex)
  major                       : 0A22(hex)
  minor                       : 0011(hex)
  Reference RSSI              : -70
Transmit power                : 0
Sniffer switch                : disable
Sniffer mode                  : -
Source IP address             : 0.0.0.0
Report switch                 : enable
Report mode                   : immediate
Report interval(s)            : 10
Report server                 : 0.0.0.0
Report server port            : -
Report via-AC                 : disable
Report via-AC port            : -   
------------------------------------------------------------------------------
Table 21-2  Description of the display ble-profile name profile-name command output

Item

Description

Broadcaster switch

Whether the Bluetooth broadcast function is enabled. The options are as follows:
  • enable: The Bluetooth broadcast function is enabled.
  • disable: The Bluetooth broadcast function is disabled.

Broadcaster interval(ms)

Interval at which BLE broadcast frames are sent.

Broadcaster content

Content of a BLE broadcast frame.

UUID

UUID field in a BLE broadcast frame. UUID refers to the universally unique identifier of a Bluetooth device.

major

Major field in a BLE broadcast frame. This field specifies a major group and is combined with the Minor field to define information about a Bluetooth device, for example, location of a Bluetooth device.

minor

Minor field in a BLE broadcast frame. This field specifies a minor group and is combined with the Major field to define information about a Bluetooth device, for example, location of a Bluetooth device.

Reference RSSI

RSSI calibration value. RSSI calibration value refers to the RSSI of a Bluetooth device measured at a distance of 1 m. It is used to calculate the distance between a Bluetooth device and a Bluetooth terminal or tag.

Transmit power

Transmit power of an RU's built-in Bluetooth module.

Sniffer switch

Whether the Bluetooth function is enabled. The options are as follows:
  • enable: The Bluetooth function is enabled.
  • disable: The Bluetooth function is disabled.

To configure this parameter, run the sniffer enable command.

Source IP address

Source IP address used by a central AP to report BLE packets.

Sniffer mode

Working mode of an RU's built-in Bluetooth module.

To configure this parameter, run the sniffer enable command.

Report switch

Whether an RU is enabled to send Bluetooth packets. The options are as follows:
  • enable: An RU is enabled to send Bluetooth packets.
  • disable: An RU is disabled from sending Bluetooth packets.

Report mode

Mode in which an RU sends Bluetooth packets.

Report interval(s)

Interval at which an RU sends Bluetooth packets.

Report server

IP address of a Bluetooth server.

To configure this parameter, run the report-to-server command.

Report server port

Destination port number on a server to which Bluetooth packets are sent.

To configure this parameter, run the report-to-server command.

Report via-AC

Whether Bluetooth packets are sent to a server through a central AP. The options are as follows:
  • enable: Bluetooth packets are sent to a server through a central AP.
  • disable: Bluetooth packets are sent directly to a server.

To configure this parameter, run the report-to-server command.

Report via-AC port

Number of the port on a central AP through which an RU sends Bluetooth packets.

To configure this parameter, run the report-to-server command.

Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 208178

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next