No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
dialer queue-length

dialer queue-length

Function

Using the dialer queue-length command, you can set the buffer queue length on a dial interface.

Using the undo dialer queue-length command, you can restore the default queue length.

By default, packets are not buffered on a dialer interface.

Format

dialer queue-length packets

undo dialer queue-length

Parameters

Parameter Description Value
packets Indicates the number of packets allowed in the buffer queue. The value is an integer that ranges from 1 to 100.

Views

Dialer interface view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

If a dialer interface receives a packet but the call connection is not established, the dialer interface discards the packet. However, if a buffer queue is configured on the dialer interface, the dialer interface stores the packet in the buffer, and sends the packet after the call connection is established.

Precautions

  • If you run the dialer queue-length command multiple times in the same view, only the latest configuration takes effect.
  • If the buffer queue is long, the interface discards less packets, but a lot of system resources will be occupied. It is recommended that the queue length value be equal to or smaller than 20.

Example

# Set the buffer queue length on Dialer1 to 10.

<Huawei> system-view
[Huawei] interface dialer 1
[Huawei-Dialer1] dialer queue-length 10
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 211348

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next